KRYPTONITE TIE RODS FOR 2011-2026 2500/3500 WITH OVERSIZED TAPERED OUTERS
Fits:
2011-2026Â Chevy 2500/3500Â
2011-2026Â GMC 2500/3500Â
Important Fitment Details:
*These Tie rods are built Specifically for the 2011-2026 GM HD Trucks Equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end.
*Will Not Fit an OEM Knuckle.Â
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.
Features:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.Â
- Solid 1 1/4"Â Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjust ability
Description:
Engineered exclusively for the extreme demands of today's heavy duty truck to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2019 2500/3500 GM HD Truck that has the centerlink mounted in the factory location and has Fabtech aftermarket knuckles. Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link.
These Tie Rods can easily be upgraded later to pair with our SS Series Centerlink.
CLICK HERE TO SEE CENTERLINK UPGRADE KIT
 In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
Original: $379.99
-65%$379.99
$133.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fits:
2011-2026Â Chevy 2500/3500Â
2011-2026Â GMC 2500/3500Â
Important Fitment Details:
*These Tie rods are built Specifically for the 2011-2026 GM HD Trucks Equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end.
*Will Not Fit an OEM Knuckle.Â
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.
Features:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.Â
- Solid 1 1/4"Â Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjust ability
Description:
Engineered exclusively for the extreme demands of today's heavy duty truck to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2019 2500/3500 GM HD Truck that has the centerlink mounted in the factory location and has Fabtech aftermarket knuckles. Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link.
These Tie Rods can easily be upgraded later to pair with our SS Series Centerlink.
CLICK HERE TO SEE CENTERLINK UPGRADE KIT
 In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
